Easy fix .net runtime optimization service 2020.

.net runtime optimization service

Fix easily .NET runtime optimization service problem in window 10.

Friends, today in this article today we are going to talk about another common problem .net runtime optimization service related to your computer.

Which is usually many computer users keep on coming and mainly this problem mostly comes when a user wants to store some software or a game in his computer.

Due to this problem many times people are not able to stall the software in their computer and after that the error of .net framework comes.

“Then in this article we will solve this problem very easily, you read this article till the end.”

The windows 10 operating system is the latest version of windows, which was first released in 2015. it was made as a free upgrade to those who were running windows 7 or windows 8 on their computers although this is a solid performing operating system.

There are instances when certain issues can occur in this short article, we will tackle the troubleshooting methods to try to fix issue with windows 10 high CPU usage by .net runtime optimization service.


Before performing any of the recommended troubleshooting steps…


It’s best to restart your computer first this action refreshes the operating system and remove any corrupt temporary data that could be causing the problem.

The first thing you should do in this case is to make sure that the .net runtime optimization service does its task quickly you can do this by assigning more CPU cores to aid it in its task.

Why this error occurs in you PC?

There is some multiple regions so this error coming up in your PC ๐Ÿ’ป :

  • The .NET Runtime Optimization Service runs too slowly on your PC.
  • The .NET Runtime Optimization Service may be corrupted.
  • Your PC may be running malware service may be infected.

Solution of .net runtime optimization service error.

Method 1 to fix .net runtime optimization service:

The process first at the search bar located at the lower left corner type command prompt then right click on command prompt and click on run as administrator.

A prompt message appears asking “if you want this device to make changes to your device click on yes” then at the command prompt type below commands and then click the enter key on your keyboard.

There are two commands for the first command you can either choose one of these according to your operating system either you are on a 32-bit or 64-bit. :-

  • For 64-bit : cd C:\Windows\Microsoft.NET\Framework64\v4.0.30319
  • For 32-bit : cd C:\Windows\Microsoft.NET\Framework\v4.0.30319
.net runtime optimization service
This is an command window.

This on the command prompt and press enter after this check if the windows 10 high cpu usage by.net runtime optimization service issue still occurs.

Method 2 to fix .net runtime optimization service:

Malware one of the main reasons. Why this problem will occur is if your computer?

If infected with malware it is therefore a good idea to run a malware scan on your computer so as to eliminate this threat:

  1. First click on the start button and click on settings an icon that looks like a gear.
  2. Then at the windows security section click on update and security.
  3. Then click on windows security at the left side next at the protection areas tab click on virus and threat protection.
  4. Then click on scan options there are options to choose from quick scan full scan and custom scan click on full scan.

    .net runtime optimization service
    Setting Window
  5. Then scan now windows will now scan your computer for any threat wait for it to complete
  6. The scan if the malware is detected it will be quarantined or removed from your system.

Now check if the windows 10 high CPU usage by.net runtime optimization issue solved or not.

If still occurs then try another quick way which is below.

Method 3 to fix .net runtime optimization service:

Solution is to simply restart the .net runtime optimization service.

  1. First open the run utility by using the windows key plus r key combination on your keyboard to open run dialog box.
  2. Then at the run dialog box type services.msc and press enter or click ok.

    .net runtime optimization service
    Run Box
  3. In order to open the services tool.
  4. Now find the .net runtime optimization service on the list
  5. Right click on .net runtime optimization service and select properties from the context menu.
  6. If the service is started you should stop it by clicking the stop button in the middle of the window run it again by clicking.
  7. The start make sure that the option under the startup type menu in the services properties window is set to automatic before you proceed with other steps confirm any dialog boxes.

Which may appear when changing the startup type check if the windows 10 high cpu usage by.net runtime optimization service issue still occurs after following the methods mentioned.

You have successfully fixed issue with windows 10 high CPU usage by.net runtime optimization service.

I hope that this guide has been helpful.

More error your PC ran into a problem and needs to restart which may you face in future

๐Ÿ˜ŠThanks for reading.

Your pc ran into a problem and needs to restart? | Easily fix it in 5 minuets.

(Easily fix it) Your pc ran into a problem and needs to restart?

Hey! your PC ran into a problem and needs to restart then easy fix it


Today!! We are going to see…..

How to recover your PC from this weird error?

Which is does not let you log into the system and the error message says “your PC ran into a problem and needs to restart” we are just collecting some error info and then we’ll restart for you eventually this error message stands for a very short time.

It looks like below image :-

Your pc ran into a problem and needs to restart
๐Ÿ™ Your PC ran into a problem and needs to restart

There you go so after the error pops up your pc ran into a problem and needs to restart immediately system restarts and then starts this automatic repair and after some time it starts diagnosing your PC and finally.

When it finds out that there is nothing to do more it comes up with this screen showing two of the options you restart or the advanced option.

Your pc ran into a problem and needs to restart step 1
Step 1

So before going into the advanced option for resolving this issue let me tell you….

Why this situation (your pc ran into a problem and needs to restart) comes?

There is multiple reasons to show your PC ran into a problem and needs to restart error :

  • Your system file may be corrupted.
  • Changes in registry.
  • Your PC may be heat ๐Ÿ”ฅ so much.
  • Recent changes in Hardware of the system.
  • Any recent driver installation which went wrong.
  • May be you got virus in your PC.
  • Your PC may be loose hard drive connection.
  • Improper shutdown of the system which includes first full shutdown.

So now you are known about whats problem in your PC and before solve it we must be a quick briefly know about BSOD

What is BSOD?

This is a type of screen, I mean a type of error, after which a blue screen starts appearing on your computer and after that your computer does not work, this type of screen is called as a BSOD error.

Can cause you data loss. Therefore, it is necessary to find a way to recover the lost data as well as to fix this blue screen error of death.

Whenever an this type error occurs in your computer, there may be three cases while correcting it, but we recommended this one which are given below.

Case A (You need boot Windows):

Safe Mode is an analytic method of Windows. It begins your PC with the negligible essential projects and administrations. In Protected Mode.

You can fix some framework related issues by uninstalling contrary programming/driver, erasing tricky documents, eliminating infections, and the sky is the limit from there.

Regardless of whether you don’t do anything, booting into Experimental Mode is valuable to fix some framework blunders by assisting the capacity framework with being re-accessed.

Step 1. In Win 10, firstly click on “Start” > “Settings” > “Update & Security” > “Recovery”.

Step 2. In the “Advanced startup” section, choose “Restart now”.

Step 3. After the restart, choose “Troubleshoot” > “Advanced Options” > “Startup Settings” > “Restart”.

Step 4. Now you see the screen. You choose Safe Mode options: “Enable Safe Mode”, “Enable Safe Mode with Networking”, “Enable Safe Mode with Command Prompt”.

Case B ( You can’t boot Windows )

In some cases, your PC will restart and prepare a startup repair automatically after the message “Your PC ran into a problem and needs to restart” appears, resulting in the

“Your PC did not start correctly” screen. Here you can see two options: Restart and Advanced options.

Case C ( Stuck in Windows loop )

Dissimilar to both of the two cases above, you have no alternatives accessible to browse. The sum total of what you have is the rehashed restart and blunder circle.

In a circumstance like this, you can either recuperate information from the adulterated operating system or fix the issue with the Windows establishment Cd/DVD.

In the event that you don’t have an establishment plate, you can make a Windows establishment media for substitute.

With the Windows establishment media, you can fix your PC by means of the Serious choices which you have no admittance to right now.

how to make computer faster clean pc download cleaner computer cleaner windows cleaner registry fix my pc

This is fix for your PC ran into a problem and needs to restart error :

Now let’s go back to the automatic repair screen here from here if you restart the system it comes with the same error your pc ran into a problem and needs to restart and here only click on advanced option here you have three options:

  1. Continue
  2. Troubleshoot
  3. Turn off your PC
Your pc ran into a problem and needs to restart step 2
Step 2

So believe me guys!

If you could just click on continue it will not do anything and it will end up again in restarting the system and getting the same error again.

Your pc ran into a problem and needs to restart step 3
Step 3

So click on the troubleshoot option here four options are there refresh your PC if you click on that it will again not gonna help you see the reset your PC is not going to help you and diagnostic and recovery tool set is not going to help you so go to the advanced option.

Now here there are multiple options that you can use to restore your system.

The first option is system restore if you have created a restore point then only the first option system restore is going to help you to solve this error your pc ran into a problem and needs to restart.

Well if you have not created any restore point so this option is not going to help you on either.

Your pc ran into a problem and needs to restart step 4
Step 4

You have created a recovery image so the second option system image difficulty is not also going to help you startup repair. If you already done that startup setting you will get different options here like:

Logging into the safe mode if you try going into the safe mode it is not going to help you again. So you have to just going to back and click on the command prompt.

Your pc ran into a problem and needs to restart step 5
Step 5

Now after clicking on the command prompt select any one of the user and type in the password once you type the password Go to the C Drive by typing C.

So let me explain you what you need to do basically here so you just going to restore the registry. We have seen the reasons for this issue one of the reason is the district changes.

So what you need to do?

Whatever! the changes that have happened unintentionally you just going to revert that and restore those registry back to its original state. So go to the C Drive by writing C.

Then go to CT windows system32 folder from here go config folder to see the content in this config folder just type dir.

Okay! So in this folder if you can see there is a folder called registry backup, so I’m just going into that folder our eg back and to see the content of this folder.

Your pc ran into a problem and needs to restart step 6
Step 6

You just going to write it down dir so in this folder in this registry backup folder there are five basic files/default Sam security software and system.

These are these are district backups and if you observe in the previous directory that is config folder in the config folder itself for solve this error( your pc ran into a problem and needs to restart).

They’re all these five files are located default than Sam security software and system, so what you need to going in basically do here is you just going to replace all those five files from this folder with this backup files in order to do that.

You need to first rename all of these five files available in the config folder so type in first, Okay! you need to go and rename the files in this registry backup folder. So now you go to back to previous directory and from the config folder.

You will first rename the default file so rename default to default one the same manner you need to go rename:

  • Sam to Sam one
  • Security to security one
  • Software to software one
  • System to system one

So all of these files have been putting in to these names now next for your pc ran into a problem and needs to restart.


What are we going to do?

Here is we are going to copy these five files from a registry backup folder to the config folder okay so let you go to registry backup folder and copy. All from this location the current location to see windows system 32 and config.

So you can see….

All these five files are now copied into the config folder if you want to just if you want to confirm go back to the previous directory config directory and type in dir. You can see here this is the copy file default and the other one is the default one which we have renamed.

Now all you need to do is just type in exit and turn off your PC now if you start a system again your decision will loads and it will start normally you can now easily log into this system.

I hope this article is very helpful to you. watch this about this

Thank you

Go to home